LANICS™

PRODUCTS

DOT LASER: LD(Laser Diode) as a light source generates laser beam with a specific angle and wavelength.
Transmitted laser beam through a lens is collimated and elliptical dot beam.
An user can adjust the beam size by movement of lens group.
The lens called a collimator can’t make an ideal collimated beam.
The collimated beam always have very low divergence angle.
Because LD emits a beam of different divergence angles of vertical and horizontal direction,
the shape of dot has an elliptical beam shape.

LINE LASER: The single line beam is made from collimated or focused beam by deflection lens or cylinder lens.
The modules make the fan angle of 10, 15, 30, 45, 60, 90, 120 degree.

CROSS LASER: The cross line beam is made from collimated or focused beam by deflection lens, diffraction lens or two cylinder lens. Low power modules (below 5 mW) make the fan angle of 5 or 50 degree,
and other modules make the fan angle of 10, 15, 30, 45, 60, 90, 120 degree.

GREEN LASER: This Green laser emit laser beam of 532nm wavelength using DPSS method.
DPSS(Diode pumped solid state) method means that it use high power 808nm LD(laser diode) as pumping energy source and it emit green laser through DPM composed of Nd:YVO4,KTP.
Moreover, Because Green laser using DPSS method has singular divergence angle,we must make the collimation beam using collimator.
It generates stable output power with external PD(Photo diode) feedback. 532nm Green beam is more visible and bright to the human eye.
So, we can use green laser in the system of measurement, positioning, lighting, alignment, guideline, leveling, machine vision etc.

LASER ELECTRONICS